Line for formatting and sprinkling marshmallows designed for longitudinal and transverse division of layers (marshmallow, marshmallow and any other viscous and sticky consistency) into segments of given dimensions and sprinkling with powdered sugar, starch, etc.
Consists of:
- Unit for pre-sprinkling the conveyor belt with powdered sugar. Equipped with a turner and individual drive.
- Slitting conveyor with a belt width of 600 mm and an individual drive. Disc cutting unit with a separate rotating shaft, disc oil lubrication system, disc cleaning system and individual drive.
- Intermediate conveyor with a belt width of 600 mm and an individual drive.
- Adjustable belt conveyor with individual drive. The module is equipped with a number of separate T-shaped bundles and is designed to move pre-longitudinal layers apart from each other. Width of the harness is 10 mm. When changing the width of the workpiece, it is necessary to transfer the strands on the mounting shaft to the required width; the size is set as a multiple of 10 mm.
- Cross cutting conveyor with a belt width of 700 mm. The module is equipped with a pneumatic guillotine cutting unit with an oil lubrication system for the blade. No product support. The cross cutting conveyor is divided into two separate conveyors with individual drives. The cutting process takes place on a separate rotating shaft.
- Conveyor with a unit for sprinkling with powdered sugar and a belt width of 700 mm.
- Conveyor for blowing excess powdered sugar from the top of the product layer with a mesh width of 800mm. The module is equipped with a plexiglass fence that prevents the spraying of excess powder.
- A system for receiving excess powder with further transportation to the receiving hopper of the sprinkling unit. Excess powder, spilling through the mesh of the blowing conveyor, ends up on the return conveyor, which feeds back to the sprinkling unit. The return conveyor belt is equipped with corrugated sides and transverse guides. The width of the return belts is 200 mm.
- Product receiving conveyor with a belt width of 800 mm and an individual drive.
Operating principle: The finished semi-finished product (layer) is manually fed onto the conveyor belt of the longitudinal divider. The disk divider ensures cutting of the formation into longitudinal blanks. Then the pre-cut blanks are placed on a conveyor belt, where the cut bundles are separated from each other. Then the separated strands are transferred to the guillotine cutting conveyor. Guillotine cutting provides transverse division into workpieces of the required length.
Advantages and features:
- Pneumatic units from Camozzi (Italy).
- Tramec gearmotors (Italy).
- Mitsubishi frequency converters (Japan).
- Control based on Delta controller (Taiwan).
- All equipment elements that come into contact with the products are made of materials approved for contact with food products and environments.
