The baking tray greasing machine is designed for applying non-stick grease to baking trays, molds and other confectionery equipment for baking. 4 adjustable nozzles evenly spray vegetable or wax based lubricant. The operator places the pan on the machine and the conveyor carries the pan to the pollination area. A large number of adjustments allow you to select optimal operating modes of the equipment.
Features of:
- the frame and casings are made of black steel with powder painting;
- the working area of the conveyor is made of food grade stainless steel;
- conveyor at a height of 1000 mm from the floor level with adjustment ±25 mm;
- removable protective panels of the pollination unit;
- drive chain with adjustable flags, side guides made of polymer;
- The control panel allows you to configure:
- conveyor speed;
- switch forward/backward movement;
- adjusting the container heating temperature;
- light and sound indication of low level of working fluid;
- 2 operating modes:
- the baking sheet is set to its original position, the signal from sensor-1 starts the conveyor, when passing sensor-2 the nozzles are started, at the end of the working area the conveyor stops based on a signal from sensor-3.
- the chain conveyor is in constant motion, the baking sheet is placed in front of the flag, and when sensor 2 passes, the nozzles are started.
- frame supports are adjustable;
- 4 adjustable nozzles from Lechler;
- Camozzi pneumatic units;
- Tramec gearmotor;
- Vacon frequency converter;
- Temperature controller and Autonics sensors.